Dual closed-loops current controller for a 4-leg shunt APF based on repetitive control

ABSTRACT

Current repetitive control strategy for a 4-leg APF is usually of a poor speed in responding to the drastic changes in load harmonic profile. In this paper, a dual closed-loop current controller composed of a repetitive control-based outer loop and a PI-based inner loop is proposed to improve the performance of a 4-leg APF, with a focus on response speed and harmonic current compensation gain. The principle of the dual loop controller is explained in detail, and the stability of the system is analysed thoroughly. To further decrease the inherent time delay associated with the PWM strategy, a zero-sequence-voltage-based PWM strategy is proposed to solve the complexity in the implementation of 3D-SVPWM methods. By formulating the relationship between the duty ratio of the neutral leg control pulse and the zero-sequence-component of the reference voltages, the duty ratios of the other three legs can be calculated conveniently. The simulation and lab experiment results are provided to verify the correctness and effectiveness of the proposed dual closed-loop current controller and the zero-sequence-voltage-based PWM strategy.     

一种轻小型四极杆质谱仪射频电源的研制

四极杆结构是四极杆质谱仪的核心结构，由射频电源分别施加两组高压高频信号进行驱动，利用电场的变化和输入离子的质荷比差异对离子进行筛选。针对四极杆质谱仪小型化的研制需求，以信号调制模块、放大模块、反馈电路和直流模块为基本构型，设计了一种应用于轻小型四极杆质谱仪的射频驱动电源。经实际测试，该电源可以在谐振频率1.33 MHz、扫描频率10 Hz的输入条件下，输出峰 峰值电压最高可达3.33 kV的调幅射频高压信号并驱动四极杆结构，扫描切换时间不高于1 ms。射频电源输出信号稳定、波动小、交直比的波动为0.1%。该射频电源相较于常规的四极杆射频电源具有更高的扫描范围，体积小巧，功耗仅30 W，接口简单，有较高的实用价值。     

脉冲电沉积镍-铜合金

采用脉冲电沉积技术在304不锈钢表面制备Ni-Cu合金镀层,镀液组成和工艺条件为:NiSO4ꞏ6H2O 200g/L,CuSO4ꞏ5H2O 10 g/L,十二烷基硫酸钠0.2 g/L,柠檬酸钠80 g/L,糖精0.2 g/L,pH 4.0,温度25°C,搅拌速率30 r/min,平均电流密度40~120 mA/cm2,脉冲频率0~100 Hz,占空比20%~90%,时间30 min。研究了平均电流密度、脉冲频率和占空比对Ni-Cu合金镀层的元素组成、表面形貌和显微硬度的影响,得到较优的工艺参数为:平均电流密度40 mA/cm2,脉冲频率50 Hz,占空比60%。该条件下所得Ni-Cu合金镀层由质量分数分别为56.53%和43.47%的Ni和Cu组成,呈“菜花”状形貌,结晶细致、均匀,显微硬度为614.4 HV。     

Application of differential evolution for cascaded multilevel VSI with harmonics elimination PWM switching

Harmonic elimination pulse width modulation (HEPWM) method has been widely applied to multilevel voltage source inverter (MVSI) to remove low frequency harmonics from its output voltage. However, the computation of the HEPWM switching angles for MVSI is very challenging due to several constraints, namely angle sequencing, very tight angular spacing and the numerous possibilities of angles distribution ratio. Realizing the potential of Differential Evolution (DE) to handle complex problems, this work proposes its application to solve the HEPWM problem for cascaded MVSI. Its emphasis is on improving the availability of HEPWM for higher output voltage by extending the maximum range of modulation index (M). It also removes the discontinuities in the switching angles and reduces the number of distribution ratio required to obtain the required solution. Compared to the most advanced (similar) work, i.e., 7-level MVSI with seventeen switching angles, DE covers a wider range of M; the maximum achievable M is 2.80. Furthermore, it exhibits very low second order distortion factor (DF₂): for the worst case, the value of DF₂ is 0.0014%. To verify the viability of the proposed algorithm, simulation is carried out and hardware prototype is constructed. Both results show very good agreement with the theoretical prediction.     

Surface nanodeformations caused by ultrashort laser pulse

Ultrashort laser pulse is a unique nanometallurgical tool which operates at extreme conditions: ultimate strength of material, the smallest spatiotemporal scales, and nonequlibrium crystallization. Approaches to ultimate strength and to highly nonequlibrium crystallization are tightly coupled with the smallness of spatiotemporal scales. Usage of the tool opens new opportunities to create materials with enhanced surface hardness, anticorrosion properties, and diverted optical constants. To use these advantages we have first of all to develop clear and reliable physical model. The paper presents new results concerning interactions of optical or X-ray lasers with metals. It is shown that ultrashort laser pulse melts surface layer, sends shock into bulk, and foams molten metal. Dense dislocation bilayer is created thanks to fast recrystallization (the first sublayer) and plastic transformations behind strong shock (the second sublayer). Plastic shock generated at moderate laser intensities attenuates sharply during its propagation into metal. During this attenuation, a plastic shock regenerates into a powerful elastic shock. This process defines boundary between the second dislocation sublayer and undamaged solid. Mechanical breaking of foam after its strong stretching and fly away of a part of melt together with fast freezing are responsible for appearance of chaotic frozen nanostructures at an irradiated surface.     

Investigation on phase shifting for a 4 K Stirling pulse tube cryocooler with He-3 as working fluid

He-3 is generally recognized for its ability to provide more excellent thermophysical performance than He-4, especially in the 4 K temperature range. However, this was not always the case in our preliminary experiments on a three-stage Stirling-type pulse tube cryocooler (SPTC). Our ongoing studies, as reported in this paper, demonstrate that the different working fluids also affect the performance through their phase shifting capability. This feature has been passed over in large part by researchers considering refrigerant substitution. Unlike previous theoretical analyses that focus primarily on regenerator losses, this report investigates the effects of the working fluid on the phase angle at the cold end in order to quantitatively reveal the relationship between the lowest attainable temperature and the cooling capacity. The analysis agrees well with our experimental results on a three-stage SPTC. While running with the operating parameters optimized for He-3, the lowest temperature of the SPTC decreased from 5.4 K down to 4.03 K. This is the lowest refrigeration temperature ever achieved with a three-stage SPTC.     

浅谈高压变频调速变压器及高压变频系统结构

介绍了高压变频调速变压器及高压变频器系统的基本原理及结构,详细论述了系统各组成部分的功能,并进行了举例说明。     

氨基羟基脲脉冲辐解研究

研究了脉冲辐解过程中氨基羟基脲与水辐解活性粒子（e^-_aq、·OH和·H）及单电子氧化剂·CO₃^-的反应动力学过程。反应近似为准一级反应，反应速率常数分别为k（e^-aq）=1.41×10⁸ L/(mol·s)、k（·OH）=1.05×10¹⁰ L/(mol·s)、k（·H）=2.68×10⁵ L/(mol·s)、k（·CO^-₃）=4.25×10⁸ L/(mol·s)。其中氨基羟基脲与·OH的反应速率常数最大，故在辐解过程中其为主要反应。     

Effect of multi pulse current treatment on microstructure and microhardness of resistance spot welded dual phase steel DP590

In this paper, microhardness and microstructural characteristics of dual phase DP590 steel resistance spot weld joint under two different welding conditions (i. e. single pulse and multi pulse) were studied. It was observed that applying multi pulse currents resulted in quasi-equiaxed grains of tempered martensite in fusion zone (FZ) of the weldment. The refinement of microstructure in fusion zone using multi pulse current treatment resulted in reduced hardness of the weld joint.     

基于IEC60076-15的SF6气体绝缘变压器的特殊性

对IEC60076-15《充气式电力变压器》中关于气体绝缘变压器的特殊要求进行了解读,同时对标准中没有提到的SF6气体绝缘变压器的相关问题进行了说明。